dB Technologies SUB 618 (18″ Active Subwoofer)

SKU: SUB 618 Category: Brand:
Share On:

SUB 618

SUB618 is a bass-reflex active subwoofer featuring a 600W RMS Class D Power Amplifier with SMPS and is equipped with a 18” transducer.

The system delivers outstanding sound pressure levels (up to 133dB) in spite of its compact housing, while providing a clean, impressively precise low-end reproduction.
Sub 600s’ outstanding audio performance allow user to build most of the PA systems with 1 single sub and 2 full range speakers, avoiding any external processing or crossover thanks to a balanced Xover signal to left and right speakers.
Controls on the amp panel allow user to operate with Mono or Stereo audio feed, activate polarity inversion and choose Outputs link mode (True Bypass or Xover). Whenever a further punch is needed, a low-frequencies boost EQ can be set thanks to the Sub Mode switch.
The series comes with a full grille design in a lightweight wood cabinet (total weight 31kg /68 lbs) strengthened with a hardwearing, scratch-resistant black covering. Carved side handles enhance portability. The design of the top side eases subs stacking in larger systems and features a M20 pole mount thread to stack full-range speakers.
Features
  • 600 W RMS Class D AMP
  • Selectable Stereo Balanced Input
  • Link or Xover Balanced Stereo Output Mode
  • Compact and sturdy wood cabinet
  • Lightweight
  • Polarity Switch
  • FLAT or BOOST Mode Switch
Technical Data
Speaker Type Active Subwoofer
Acoustical data
Frequency Response [-10dB] 35 – 130 Hz
Max SPL (1 m) 133 dB
Directivity omnidirectional
LF 18″
LF Voice Coil 2.5″
Amplifier
Amp Technology SMSP digital amplifier
Amp Class Class D
RMS Power 600 W
Peak Power 1200 W
Processor
Controller 28/56 bit DSP
Limiter Peak, Thermal, RMS
Controls Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input 2x XLR (balanced)
Signal Output 2x XLR (balanced)
Mechanics
Housing Plywood
Grille Full metal grid
Pole Mount M20
Width 500 mm (19.69 in)
Height 625 mm (24.60 in)
Depth 690 mm (27.17 in)
Weight 31.1 kg (68.57 lbs)
Weight 47 kg
Dimensions 70 × 72 × 52 cm

Specification

Technical Data
Speaker Type 2-way Active Line Array Module
Acoustical data
Usable Bandwidth [- 6 dB] 67-20,000 Hz
Frequency Response [+/- 3dB] 78-18,100 Hz
Max SPL 135 dB
HF 1×1.4″
Voice Coil HF 3″
Type HF Neodymium, Titanium Diaphragm
LF 2×10″
Voice Coil LF 2.5″
Type LF Neodymium Aluminium Phase Plug
Horizontal Directivity 100°
Vertical Directivity depends on array size and configuration
Amplifier
Amp Technology Digipro G3 [bi-amped]
Amp Class Class-D
Power RMS 900 W
Peak Power 1800 W
Cooling Convection
Power Supply 900 W SMPS with Auto-range PSU
Processor
Controller DSP 56 bit
AD/DA Converter 24 bit/48 KHz
Limiter Dual Active Multiband Peak, RMS, Thermal
Processing (filters) FIR Linear Phase
Crossover Frequency LF-HF 950 Hz
Slope LF-HF 24 dB/Octave
Input
Signal Input 1xXLR fem, Bal.
Signal Output 1xXLR male, Bal.
Network RDNet remote control RJ45 connector IN/OUT
Power Socket 1xPowerCon TRUE1 IN

1xPowerCon TRUE1 Out

Controls 1xSpeakers Coupling (7 presets)

1x HF Compensation (8 presets)

1XInput Attenuation Rotary Switch

Mechanics
Housing Multiplex Plywood

Polyurea painted

Housing Design Trapezoidal 10°
Handles 2x side
Rain Cover Included
Rigging Points Integrated rigging hardware
Width 720 mm (28.35 in)
Height 320 mm (12.6 in)
Depth 520 mm (20.47 in)
Weight 28.6 Kg (63.00 lbs)

You may also like…

Scroll to Top